Pointless (well nearly)

I recently joined in a thread on RM Webb about pointless layouts. After an initial surge, it quickly drifted off to a trickle. I must admit that I was surprised and slightly saddened as I had hoped to contribute further.

I firmly believe that small layouts are a great entry-level into our hobby and further more they are great for modellers with limited space. I have had several friends that jumped straight in with larger layouts that later floundered and never got anywhere near finished. A small layout can be as complex as you want and is a great learning curve for bigger projects.

I find the use of traversers and sector plates great money and space savers and also reduces overall layout size.  I have produced several layouts with space-saving devices and most are under 6′ x 2′, however one of my latest is 10′ x 15″ and is two 4′ boards plus the sector plate. When you consider that each point in O gauge needs a point motor, CDU, wire and possibly a chip, you rapidly approach £70 per point, with OO coming out just under half this price.  If you also consider the size of an O gauge point you can see why it is wise to engineer as many as you can out of your layout designs. I have not used traversers or sectors in N gauge as by it’s nature it is a space saving gauge.

I have often been asked how I came up with the sizes on my smaller layouts. I always say, that’s easy, I measure the boot of the car. If you can not transport a layout, you probably can not attend Exhibitions.

A small by-product of having small layouts is that over the years I have had many Exhibition invites to ‘fill gaps’ in the floor plan. Some Exhibitions are obviously limited for  space and have to keep exhibits small or medium-sized. On the other hand some of the bigger Exhibitions seem to only go for the medium to large layouts. As good as they may be the larger layout is mainly outside most people’s capabilities. I am not putting down large layouts, we are blessed with some fantastic ones at present. I just think that the bigger Exhibitions should have some small or even micro layouts to inspire potential new modellers and the widest presentation of our hobby should be portraid . Size is a factor at an Exhibition and is just as important as country, scale, era, gauge and location

The under 6′  layouts have appeared in previous posts on this site, they are:-

SEFTON YARD                               O gauge             one point       Sector plate

MERLINS LANE                             O gauge             one point       Sector plate

NORFOLK COKE AND TAR         O gauge             pointless        Traverser (single track)

LOWE St.                                      OO gauge              one point       Sector plate

And the 10′ layout is:-

MORLOCK HEATH                       O gauge              one point       Sector plate

Please have a look if you have not already.

RECOMENDED READING —-

Building Micro Layouts By PAUL A. LUNN

Layouts for Limited Spaces By NIGEL ADAMS

 

 

A tale of Two DRS Class 20’s

I will start with 20307, I made this using an A1 Models conversion kit and a Lima model as the  base, this was before Shawplan had done their finer etched conversion. I would have used the Shawplan parts had they been available. This was probably about ten years ago. It is very lightly weathered.

20303 was purchased, by a friend from Ebay recently. It was purchased with a different number, I changed it before weathering. It also had screw couplings but as it was to run as a second loco it had to have tension locks at both ends. The base loco is a Bachmann and it is assumed the conversion was using Shawplan parts. I would say the work was carried out to a good standard. The paint however was very glossy either by design or accident, so a dulling down coat of varnish was applied before quite a heavy weathering.

Conclusion, of course the Bachmann/Shawplan is the best way to go, but I still have a soft spot for the Lima Class 20. I actually recently purchased a further A1 DRS conversion for class 20 which I hope to do soon.

dscf5074

dscf5075

dscf5077

dscf5078

dscf5079

dscf5080

dscf5081

dscf5082

dscf5083