Year: 2016

OO Test Coaches

Kelvin Barnes Carriages, Departmental

During the late 1990’s when Bachmann brought out their superb Mk1  and Mk2 coaches I wondered what to do with my two dozen or so Lima models. Some were repainted into various liveries that were not available in the Lima or Bachmann range, these were sought after and sold. This left about ten that were standard Lima and to be honest, not worth a lot at the time.

I decided that if I took some and ‘cut and shut’ them I could turn them into Department and Test coaches. As well as cutting them about, I filled in windows, made roller shutter doors, re-profiled the roofs and remodel the ends. I also purchased some Replica Railways bogies of various types. I have to say at this stage I did not replace the roof vents that were left as the prototype. I really wish I had and have to say this was a missed opportunity.

The best part of this project was the research, this was the time that SERCO had most track testing contracts for Railtrack and later Network Rail. There was many great websites that  helped a great deal, books were a little thin on the ground, but some were available. I drew up a wish list of ones I would like. I did rough drawings of each carriage, both sides, the ends and the roof where possible, not many photographs of the roofs exist for obvious reasons.  I did amend some of the under floor boxes etc., but not all. Again I wish I had done a bit more to the underfloor bits.

Now a note of caution, a lot of the coaches in departmental service ‘evolved’ in service, some had extra windows added, vents and grills added and some went the other way and had things ‘filled in’.

As I say above, I did regret not doing more to the roof and under frame, my excuse at the time was a limited budget and time. I also thought that at exhibitions, most people just see a train go round without stopping and little notice is taken of the underframe, although the roof is very noticeable.

I have to say that the plastic that Lima coaches were made from was very soft and easy to cut and re-glue in different positions, it fills well and sanding is easy, gluing plastic card to it was also easy.  It also takes enamel paints very well.

After doing this exercise, I then turned my attention to Dapol Mk2D’s and even a Lima Mk3. All were cheap purchases and went through my modification process.

Although not perfect – they are better than nothing!

I later also took a Lima Class 101 and turned that into ‘IRIS 2’

All  stock  to be weathered later.

 

Silver Hill

Kelvin Barnes Uncategorized ,

I made Silver Hill for Jerry Prentice, who at the time was a professional modeller working for Braintree Models. Jerry already had a layout plan and it was just fitting everything in that he wanted. I believe I did this and it was certainly well received. It was not made as an Exhibition layout and was purely for private use and to be used as a photographic scenic base  Jerry had a vast collection of detailed Lima models at the time, as did some of his friends. This layouts 3rd rail section was fully researched and checked with a Southern Region Engineer. One thing a bit different on this layout was that we made removable sections in the back scene so that photographs could be taken from unusual angles.

I think Jerry had the layout for several years before selling it on, I believe it has been sold on at least twice since and possibly still exists.

I  later made Jerry another OO layout/diorama as a photographics background for his models, it had no electrics and was purely for photography – sadly I have no photographs of that layout, hence mentioning it here.

 

08921_09101_s

Other commissions

Kelvin Barnes Uncategorized

THIS IS A GROUP OF LAYOUTS THAT I MADE BUT SADLY HAVE NO PHOTOGRAPHS  OR TRACK PLANS – SO DO NOT WARRANT A SEPARATE SECTION

STAINSBY

This was definitely out of my comfort zone – A  ‘G Scale’  layout in a space of 8′ x 2′! using two 4′ x 2′  boards. This is quite a long story and it has been covered very well by MODEL RAIL. Sadly, I have no personal photographs of this layout and  the only way to see any are in the magazine. I believe the owner had this layout for about four years before selling it on – sadly I have no idea where it is or whether it still exists.

This layout has appeared in MODEL RAIL  No 111  December 2007

It has the full story, great photos and track plan

BRIANS LAYOUT

This layout was situated in a loft conversion and was one of the largest I ever made. The layout had a quite unusual brief, Although all OO, it was to be conventional around the outside loops with Hornby Live Steam on the inside loops. I have to admit the combination of live steam, conventional electrics and a rather hot airless loft did give me a lot of concern. Sadly I believe that after I finished  the project Brian did suffer some reliability problems, especially with points near the live steam tracks . I also believe that Brian later had a Loft Window put in with some form of temperature control, whether it helped or not I do not know. I have been to Exhibitions in the summer when high temperatures and large crowds have caused very humid conditions that can affect running. I think the popularity of OO live steam has faded but at the time was the thing to have. My conclusion is not to mix the types, and never in confined  spaces. Brian was a fantastic chap to work for and we had a great time making the layout.

DAVES LAYOUT

I was approached by a model shop in Essex and asked if I could help build a large OO layout for Dave. Sadly Dave had been involved in a bad motor cycling accident and was paralyzed, Dave had very little movement in his hands and none in his legs, he was obviously wheelchair bound. The electrics were given to an electronics engineer as the control panel had touch pads and very complicated switches. My job was track laying and the scenic work, Dave with his helper, Mary would build houses and railway structures , Mary being Dave’s hands.  We all came up with a track plan and work commenced. I have to say this was some of my happiest and saddest modelling I have ever done, a strange statement but it could be very emotional, but interspersed with much laughing and fun. Dave could be a hard task master and it was difficult to get things over to him from time to time, but it was always managed well by Mary. The layout was 95% finished and looked very good, however there were ongoing problems with the electronics. The electronics were so far ‘above my head’ it was difficult to even suggest anything. At this point I drifted away from the project with the intention of returning to do the last bit of weathering that was required. Sadly, very sadly I was never called back as I believe the electrics could not be sorted. A  year afterwards I heard that Dave had died and that all the stock was sold and the layout broken up. The saddest end to any of my projects.

ANGLIA RAILWAYS SIGNALING LAYOUT

This,  in some ways was a dream, even when approached  by Anglia, I could not believe it. The brief was simple to build an unpowered OO layout to demonstrate all types of signalling currently being used in the franchise area. The signals did not have to be working but had to be placed in the correct positions,  in the right order and with the correct options for drivers and guards. There would also need to be stations, platforms, crossings and all other situations that could impact the drivers journey. The loco’s and units had the motors removed so they could be pushed into various scenarios. The system/layout was used successfully for the next few years. Sadly after this I heard that the manager who did the training had died of a heart attack aged just 50. I was led to believe the layout went out of use after Clint’s death and was broken up. The layout was sponsored by Hornby who supplied all the buildings, track and ancillaries. I certainly learned a lot about signalling during this project, which also included a couple of cab rides to see the real thing in operation.

HEALTH AND SAFETY EXECUTIVE LAYOUTS – RAILWAY INSPECTORATE

I was commissioned to do two OO layouts for the Eastern Region of the HSE (RI). These layouts were to take around  schools to show children the danger of railways, with special emphasis on electrification. This was a very enjoyable exercise as I was told to do the people placement on the layouts ‘doing stupid things’ . Well, being stupid comes easy to me so it was easy to invent scenarios. These varied from flying kites under the wires, dangling feet over platform edges, general trespass, trying to retrieve personal items from the track and climbing Catenary. Although they were not named, I unofficially called them ‘Fatality Alley’ no.1 and no.2. If we saved one life or injury then these have to be the best layouts I ever built.

THOMAS THE TANK ENGINE LAYOUTS

Over the years in think I did about five ‘Thomas’ OO  layouts, possibly more. They varied from basic baseboards with track to one with full scenic features. I never turned down a Thomas layout as these layouts could inspire the youngsters into the hobby. I also made the layouts at a much reduced cost. It was fantastic listening to the parents on just how much the kids loved Thomas and his friends.

I KNOW I MADE AT LEAST TWO OTHER LAYOUTS, BUT I CAN NOT TRACE WHO THEY WERE FOR OR WHAT THEY WERE. I KNOW ONE WAS FOR A 10th BIRTHDAY AND ANOTHER WAS A THOMAS TYPE LAYOUT BUT FOR MODERN DIESELS.

OVER THE YEARS I HAVE ALSO DONE MANY WHAT I CALLED ‘ASSISTS’ ,  THIS WAS HELPING PEOPLE WITH THE BITS OF LAYOUTS THEY DID NOT WANT TO DO, HOWEVER  I DID NOT DO AN ELECTRICS SERVICE AND PASSED THIS ON TO OTHERS. I THINK I HAVE HAD ABOUT FIFTEEN ASSISTS.

 

G Scale Class 66

Kelvin Barnes G Scale

I took on something a bit different when I was asked to number, detail and weather a G scale Freightliner 66. I did have my doubts about how I was going to achieve this due to the shear bulk of the Loco. The owner only wanted a light dusting but I would have really liked to have done it medium or even heavy.  I cleared my work top and my son helped to turn the loco as I sprayed, thankfully it turned out fine.

 

O Gauge Stock Boxes

Kelvin Barnes Stock Boxes

Over the last few weeks I have been making stock boxes for my O gauge steam loco’s. Up until recently I kept most of them in a communal stock box that held about six loco’s, trouble was they were very heavy and getting more difficult to carry about. I decided to consign the larger box to wagons and/or carriages so that it would become manageable. As I don’t have any large loco’s at present I  decided to  make them in three sizes. Size one, ‘Small Tank’, size two ‘Large Tank’ and size three ‘Small Tender’.

I wanted to achieve a box that was light, strong and stackable for storage. After a few experiments with some old stock wood left over from the business, I decided to use Obeche for the sides and base, a harder wood for the ends, its name escapes me and MDF for the Lid. All would be held together with  ‘angle’ softwood. I also decided to ‘cork line’ the inside and use Cork to hold the loco firmly,  I used various thickness to achieve this. As an alternative to the end pieces of cork I use pieces of foam.

 

O Gauge Carriages

Kelvin Barnes Carriages

Although I currently have no layout to run coaches on, I felt I would like a small fleet. Because I could not run any  I did not want to spend a lot of money on them and so turned to kit building. Most of the kits are Kirk Kits with an odd JLTRT as well.

Kirk Kits are very reasonably priced but they really come alive if you add extra detail. Yes, they are time-consuming but with care and a little fettling  they are really good. I guess that by the time you have purchased the interior and the wheels, buffers,  bearings and pipework, the whole coach costs about £85. Being a BR(E) transition person all the coaches are Gresley and Thompson.

I also purchased a MTH Stanier full brake for my ‘milk train’. I still need to number it and then do the weathering.

The JLTRT kit is a CCT and was a lovely kit to make, only slight problem was that the wrong size bolts were in the kit (to short) but I will be investing in further kits from this manufacturer.

Some coaches still to be weathered.

DSCF3741

DSCF3742

DSCF3743

DSCF3744

DSCF3746

DSCF3793

DSCF3794DSCF3795DSCF3796DSCF3797DSCF3798DSCF3799

 

 

Autumn Lane

Kelvin Barnes Uncategorized ,

After breaking Parkside East and selling Broadgate another depot layout was needed for the  Exhibition circuit. The answer was to be Autumn Lane and this time there was some extra requirements,  I would theme the season and there would be provision for Electric Locomotives and overhead wires, I also managed a small station halt. The station would be on a through line and there would be a fiddle yard at either end. It was really hard to plan the fiddle yard and it ended up just holding two loco’s in each end. However, being a Depot Layout I felt that the Depot Yard was an ‘open viewable fiddle yard’ .

After 5 years on the circuit I sold Autumn Lane to a very nice chap called Noel Oakes in the North of England. After having the layout for at least 5 years Noel has sold the layout on. I have no idea where it is now!

Although I could run different era’s, I usually run the EWS era at Exhibitions as it was then current and that’s what the Exhibition Managers asked for.

All models on the below photographs are Lima and Hornby. Except the 08 is Bachmann.

Please Note:- The Plan of the layout  in MODEL RAIL has two sidings missing – another Plan with the sidings added is below.

In reflection I think I crammed to much track into a small space – but it was a Depot!!!!!

This Layout appeared in MODEL RAIL No.66 APRIL 2004

Autumn Lane

DSCF0219

DSCF0184

DSCF0183

DSCF0182

DSCF0181

 

DSCN0090

EWS locos

View general B

View general C

Parkside East

Kelvin Barnes Uncategorized ,

Parkside was my first ‘proper’ layout. It took me quite a while to make and it was always very much trial and error. I had been detailing and repainting diesel locomotives for some time, but it was not until we moved to a slightly larger home that work was started on the baseboards. I really struggled to get to grips with the electrics although the scenic and making buildings came very easily to me. At this time any thoughts of exhibiting were at least 10 years away.

We had Parkside East for 15 years but after this length of time it was showing its age and the decision was taken to scrap it and retrieve as much as possible for another layout.

This layout has appeared in RAILWAY MODELLER. (January 2000 I believe)

scan

Untitled-10 (2)

Untitled-6

scan0041

scan0033

scan0016

scan0015

 

 

 

Ayling Island

Kelvin Barnes Uncategorized ,

Ayling Island was one of my ‘now for something completely different’. I wanted to try out 3mm sprat and winkle couplings on a 4mm layout , I wanted a run round so the loco needed to have the hook at one end and the loop at the other. I tried to work out how I could do this with a diesel loco or shunter,  After a few trials and many errors, I decided that a small steam locomotive would possibly  do better. I purchased a Dapol Terrier and proceeded to cut away the back portion of the chassis at the coal bunker end. I made the paddle of the Spratt and Winkle smaller and added a tiny piece of lead to make a positive movement. It worked and a further two Terriers were purchased. The Terriers, 3 coaches and 15  wagons had the same treatment. Ayling Island was born and the year would 1959-61′ ish. Why Ayling and not Hayling – easy my wife has relations with that surname and, yes they live in Sussex!   Anyway the final track plan was nothing like Hayling.

This layout has had a remarkable life, we had it on the circuit for about four years and after it was sold it continued on the circuit and still is. After I sold it, it went through a transformation to more modern times and emerged as ‘Loch Ayling’ and is now a Scottish Layout!

This layout has appeared in MODEL RAIL No. 78 APRIL 2005  as BR(S) Ayling Island.

Ayling Islandpict0058pict0056

pict0005

pict0008

pict0017

pict0020

pict0027

pict0030

pict0031

 

pict0048

pict0051

 

 

 

Strachan

Kelvin Barnes Uncategorized ,

Strachan was my first commission when I started my new business in 2000. I had known Les Williams for about three years at the time and we came to a deal that would see Strachan born. It was to be based in Scotland around the mid 1970’s. Les would give me a list of requirement and we set about getting all the parts we needed. Whilst Les was a good chap to work for, he knew what he wanted and we tried to fit everything in. Another long lived layout, Les still owns this layout and occasionally exhibits it.

This layout has appeared in both RAIL EXPRESS and RAILWAY MODELLER

I  can only find a few photographs in my collection – I will try and get more!

Station_end_1Goods_yard_3 (2)