2nd New Class 37

After backdating D6753 I started on the second Class 37 purchased from the latest batch released by Heljan. This time it was an overall green variety with full yellow ends. Again I researched all possible locos that fitted what I required, I came up with D6749, a loco that came to East Anglia about the same time as it received this interim livery.

There was no need to backdate the head codes this time as they already had the correct type, so just a case of numbering and adding detail parts.

This Loco will now join the list of Loco’s to be varnished and then weathered.

New Class 37 Backdated

I purchased a Blue Split Head Code Class 37 by Heljan. This Loco had Black Head Codes with white marker dots, I therefore had to backdate it for my era of 1967-68.

After some research I decided I would make the Loco D6753, this was a bit different to most early blue 37’s. It had the new BR Logo on each cab side with the number above as opposed to having one on the bodyside.

After carefully removing the bodyside logo all new transfers were added, this included adding new head code numbers and letters.

All add-on accessories were painted and added. The Loco is still to be varnished and weathered, but this is on a large ‘to be done’ list.

It was nice to do something a bit different and by this time it was a local (to me) Engine being based at Ipswich.

LNER Y8 (NER TYPE K)

The latest addition to my O Gauge Fleet. An Ebay Purchase at a very reasonable price – well made – well painted and a superb runner., It will be renumbered as ‘Departmental No.55’ the Doncaster works pilot 1951-56.

Class 33 weathering – revisit again

My previous post shows my attempts to pull around a factory weathered Class 33 – I said at the end I was still not happy and would revisit the project —— I am doing that now – more photos in the morning of hopefully a better attempt – nothing is ever finished until you are happy with it.

And then there was three.

Taking advantage of the warm weather and the non arrival of some bits I am waiting for to continue the OO scenic layout.

I had three 4′ x 15″ laser cut baseboards, I also had three small fiddle yards in kit form. The fiddle yards (sector plates) were made up and attached to the already made baseboards. I have experimented with the lengths of the fiddle yard sector plates by adding extra pieces onto the original kit item supplied.

This is not the first time I have used this method to make small layouts, and an earlier post shows how I did the conversions.

Two of the three layouts still have options to have another ‘bolt on’ baseboard added so that the scenic area could be doubled. One has had backboards added already and will remain this size.

The baseboards are from Grainge and Hodder.

The Fiddle Yards are from Norfolk Heathworks.

I have no real quick plans for these layouts except to say, one will be OO, one will be HO and one will be O gauge.  I hope to start at least one layout during the Autumn.

 

IMG_1818

IMG_1819

IMG_1821

OO Scenic Sections joined and Engine Run.

Well quite a lot of work done on the scenic boards of the new OO layout. The backboards were undercoated, it was electrically joined and the last bit of track was glued down and copper clad sleepers added on the end.

I cleaned all the track, and then run an 08 shunter on both lines and tested the whole tracked area.

While I want the layout to be very rural with very few buildings etc. I do want a focus and thought that a farm would be nice without breaking my overall aim of ‘running trains through the countryside’ . I have a lot of farm buildings that I was given when I helped break up a layout for a friend, and they were found and placed on the layout for assessment. I am not totally convinced about the buildings but planning things is still in the early stages.

IMG_1806

IMG_1807

IMG_1808

IMG_1809

IMG_1813

IMG_1814

IMG_1815

IMG_1816

IMG_1817

Things will slow down a bit now as the second traverser is still three weeks away !!

Adding Backscenes to OO Layout.

Last couple of days spent on adding 3mm MDF Backscenes to my two scenic boards for the OO layout (still no name).

Still waiting for 2nd traverser kit to turn up, so fill in jobs being done a little out of order.

IMG_1800

IMG_1801

IMG_1802

IMG_1803

IMG_1804

IMG_1805

The two scenic boards on OO Layout

It has been a very busy day outside today – pleased to find some shade most of the day I have now married up the two scenic boards and I now have the rails over the join – I used copper clad sleepers on the edges to reinforce them.

I then turned to the river. When I cut the river out of baseboard, I kept the piece cut out – this is trimmed to the size of the bridge and then ‘let in’ to the edges of the river.

I then finished all the track laying according to my plans and advice from our group members.

Here are a few photos in sequence of todays work.

IMG_1749

IMG_1748

IMG_1751

IMG_1755

IMG_1756

IMG_1757

IMG_1758

IMG_1759

IMG_1761

IMG_1762

IMG_1763

Well that’s about it for now – the second traverser is still about a month away, so apart from a few electrics on the two track join and possibly a little landscaping, that’s it.

 

Making a river on new OO layout

I have managed to take photos of the methods taken to make a river. Firstly I need to say, I used this method as I wanted to add to the integrity of the baseboard. Polystyrene would be my preferred method, but that would not enhance the strength of the baseboard. Before cutting the river shape out of the baseboard, I re-enforced the lowest level with 2″ x 1″ softwood, this will be the main strength of the baseboard after cutting. I then cut the river shape and added the river base.

IMG_1718IMG_1738

IMG_1739

The next thing I did was to cut stout cardboard to form the inner banks. I then made some templates to the actual formers. After that I added re-enforcing strips between the formers.

IMG_1729

IMG_1728

IMG_1731

IMG_1730

IMG_1733

IMG_1734

After letting the whole thing dry overnight, I stuffed the spacers with newspaper. Finally I added a coating of ‘polyfilla’. After leaving overnight again, I smoothed the whole area down with a small file and sandpaper,  after vacuuming and cleaning up I applied a coat of brown emulsion paint.

IMG_1736

IMG_1737IMG_1740

IMG_1741

IMG_1743

IMG_1744

I now feel comfortable with the strength of the baseboard. But again I will say that lighter materials will be used to form other undulations on the boards.